All Products
Keywords [ 6mm stainless steel plate sheet ] match 72 products.
10mm 6mm 2mm 4mm 5mm Mild Steel S275jr Cold Rolled Ms Carbon Steel Sheet Plate Flange Plate
| Model NO.: | A36 |
|---|---|
| Special Use: | Cutting Tools, Measuring Tools, Cutters In Common Steel, High-strength Steel Plate, Wear Resistant Steel, Silicon Steel |
| Stock: | Stock |
BS Standard 6mm Thick Carbon Steel Sheet S275 S355 A709 A517 with RoHS Certification
| Model NO.: | A36 A106 Q355 |
|---|---|
| Technique: | Hot Rolled |
| Application: | Mold & Dies, Ship Plate, Boiler Plate, Container Plate, Flange Plate |
Hot Rolled High Strength Carbon Steel Sheet Plate 1mm 8mm 6mm 10mm Thickness AISI JIS GB
| Model NO.: | A36 A106 Q355 |
|---|---|
| Technique: | Hot Rolled |
| Application: | Mold & Dies, Ship Plate, Boiler Plate, Container Plate, Flange Plate |
ASTM Hot/Cold Rolled 4X8 Cast Iron Metal 6mm CS Low/High Mild Strength Steel Sheet
| Model NO.: | Q235B |
|---|---|
| Technique: | Hot Rolled |
| Application: | Mold & Dies, Ship Plate, Boiler Plate, Container Plate, Flange Plate |
Black 6mm Color Carbon Steel Coil Q235 St37 Rough Turning Surface
| Model NO.: | Q345B |
|---|---|
| Technique: | Hot Rolled |
| Application: | Mold & Dies, Ship Plate, Boiler Plate, Container Plate, Flange Plate |
Pure 99.99% Copper Bar Solid Copper Rod ASTM AISI C11000 Copper Earth Rod Bar Water Heater
| Standard: | ASTM |
|---|---|
| Elongation: | 45-50 |
| Ts (MPa): | 22-25 |
Water Tube Copper Wire Scrap 99.9% Pure Copper Wire Rod 8mm with Golden Appearance
| Model NO.: | Copper |
|---|---|
| Standard: | ASTM |
| Elongation: | 45-50 |
C11000 T2 Copper Wire Rod 8mm Small Diameter Copper Rod Coil for Oil Cooler Pipe
| Model NO.: | Copper |
|---|---|
| Standard: | ASTM |
| Elongation: | 45-50 |
99.9% Pure Copper Bar C10100 C12200 C18980 C15715 2mm 3mm 6mm 8mm16mm Copper Round Bar
| Model NO.: | Copper |
|---|---|
| Standard: | ASTM |
| Elongation: | 45-50 |
Copper Ground Rod Brass C5210 C2200 C7521 H62 H63 H65 Rod for Gearround Copper Bar
| Model NO.: | Brass |
|---|---|
| Standard: | ASTM |
| Elongation: | 45-50 |